Preparation and production work before starting the paper cup machine:
1. After the preparation work is completed, when the motor is about to be started, you must shout "Turn on" before starting the motor without any response. (This is to prevent the operator from being invisible and causing unnecessary safety accidents when the mechanic is repairing on the opposite side or behind the machine).
2. Observe the machine's operating conditions carefully, take a cup to check the bonding effect of the paper cup, preheat, main heat, whether the knurled part is yellow, or damage the paper cup.
3. Check the bonding effect of the bonding place, whether there is any indirect bad condition, the firmness of the bottom of the cup and the bonding is suitable for tearing and fuzzing. If there is indirect fuzzing, it is a suspected leaking cup. The water test is allow.
4. In normal operation, if you find or feel something abnormal in the machine, you must first lift the cup body, and wait for the last cup to pass the knurling before stopping the machine for inspection.
5. When the machine is shut down unexpectedly midway and restarted for a long time, take out the fourth and fifth large plates and check whether the knurled parts are glued.
6. The paper cup machine operator pays attention to the forming conditions of the cup mouth, cup body and bottom at any time during normal production, and checks the adhesion and size appearance of the cup from time to time or checks one by one.
7. When the staff concentrated their attention during the operation, and found that there was an abnormal sound or the bottom of the cup was not well formed, they should stop the machine for inspection immediately to prevent greater losses.
8. The operator must be serious and responsible in the production process, and test the cups he produces with boiling water once an hour, with 8 cups each time.
9. Before the operator seals the carton, the number of small packages should be checked randomly. After the random check is correct, the product certificate or product pattern should be cut and pasted on the upper right corner of the left side of the carton, and the job number and production date should be filled in the box. Finally, the sealed boxes are neatly stacked to the designated location. Zhejiang Pingyang Jinchuang Machinery: Specializing in the production of paper cup machines, paper bowl machines, coat machines and other paper products machinery and equipment. Tel: 13282702216 Mr. Jin http;//www.louem.cn
